Now, u see?

 

found a baseline on the camcon website... ill just put that one in and turn it on c what happens.. then turn it off

 

not everyones baseline is going to work well man.. i suggest going to someone who knows how to advance the timing correctly throughout the rpm range.. your auto you dont even use the full range all the time anyways...

i do know someone who is reputable and can tune it.. and dam 150 bucks for a dyno?? were do you go to they are ripping you off lol.. i usally pay 40-60 max.

 

I think he meant $150 for Dyno Tuning, not just the pulls.

 

i dont even know where to go. tcpete wher do you suggest? think ill get some good gains from an auto? heard you bored out your engine yourself ...... feel any differnce?

 

for dyno go to lujan motorsports
for tuning jptuning
for the headwork i did myself...you can ask johnathan as i gave him a ride last night with the freshly worked head.. 1 & 2 gear all spin..3rd chirps...and im gone after that.. manny with the silver tc that goes to the doral meet on monday has seen me in action(pre head work)..and johnathan(badseed305) and peter(cubano69) with the rs2 both have ran me or rode in my car after the head work.. they can tell you my call allmotor is ...and thats just with an intake... header will be coming soon and itb's by january or december... ill swing by tonight at the monday meet.. you can take a ride if you want

 

How much was for the P&P?

 

nothing i did it myself with a dremel, electric measure meter, and some 1000-1200-1500 grit sand paper

 

Have u done this before?

 

yes on my old gsr and other b series and k series for friends.. this is the only tc i have touched so far. but i will be doing the same to a few friends of mines.

 

how much would you charge? how long did this take ? how much hp do you think it got just estimated...

this would be a great addition to my camcon and full exhaust !

 

well i did alot more then just that to my head but im not saying anything.. but to give u an idea i made 156-160 whp with just a CAI & unless you have 3 days to burn of downtime or a spare head i cant do it.. it takes alot of time and work.. your looking at an easy 400 there for all the upgrades and work i did.

 

wow 400 lol braking my piggy bank open ! i got 3 days of down time... after i get my exhaust and spipe i might consider it then tune my camcon for a/f ratios cuz i heard you are running a little rich... what kinda whp you think ill be looking at?

im 143 right now with zpi pully alphawerks header and k&n intake

 

ill talk to you tonight at the meet!

 

well it looks like im getting dynoed and tuned for 40 bucks ,,, thanks to a fellow scion owner YEY!

 

who is going to dyno and tune your car?? we never really talked at the meet .... but i hope u liked alexs car ride lol..

 

alex said he could do it ...

i just want to reach about 15.4 quater mile...

 

alex should be able to tune the cam com.. no problem..there is a good preset that was posted here on the boards.. let me see if i can find it..

 

they have a preset on the camcon website.. but im pretty sure its not gunna be that good with my mods..

 

hey tcpete, where is the ecu in the car????