can this be done without any problems? Thanks

 

my answer is going to be a no since the 06 and 08 have different compression ratios

ibtl

 

yep your right, that would make sense

 

actually you can pull it off...just u would need to change the maf to the same year as the ecu,

think about it, when u build your motor for n/a applications and just swap pistons...u dont tune... so yea u could use the ecu ...would i do it..no takes too much time


hey justin has the paypal thing going?

 

well, the pin-out on the ECU harness is different between 05-06 and 07+, thus why one has to specify model year when ordering a PnP harness for an F/IC or eManage...

 

this is exactly why i said i wouldnt do it it would take alot of diagrams and snipping of wires

 

Does that mean the ECU for an '05 or '06 are interchangeable with each other...and an ECU for '07, '08, or '09 are interchangeable between those three? ...or does it have to be the exact model year?

 

05 pairs with 06, 07 pairs with 08 and 09 no modifications needed