I have an .82 a/r turbine so the smaller pipes should help me boost a bit quicker. I would love to make my own pipes but I have no welder and no were to weld around here. I could wait till spring break but wanna get boosted before than.

 

I thought the current dezod's pipes are 2.25- 2.5 setup, chad had 2" and 2.25 right?

 

Chad has dezod pipes. no clue what they are since ive never measured them.

 

i think its more on his manifold+turbo making him choke on higher rpms.. maybe a bit more boost too

 

i did some simple measurements on my TT kit, just for reference for anyone interested.

measured from the coupler at the compressor elbow, about 10" from top of radiator


elbow to IC pipe coupler is about 9" away from driver's side radiator endtank


distance of comp elbow to radiator is around 0.5-0.75"

 

I have dezod oil lines and im not sure that the feed will be long enough for my manifold.

 

^^ should be long enough... how long is the oil line, the oil feed im using is only 12" and oil return is i think 19 or 20"