Here's a link to the "tC Stealth Sub"

Stealth Sub

...and here's the disclaimer.

Anyone that wants to build one for themselves or for a buddy etc. is welcome to use my design. However... anyone that wants to fabricate these in a production environment for profit will need to contact me to get permission.

So... if you take the plans to a local shop to get them to fabricate it for you and they get the bright idea that they can make a ton of money selling these things... then... they have to clear it through my company... Dead Dog Design. My email is... flbusa@flbusa.com

Oh and one last thing... Dead Dog design takes no responsibility for any monetary loss, damages or personal injury as a result of fabricating this design. Basically you're on your own.

Enjoy!!!

Pete

 

Thank you very much Pete. I will be building this for myself only.....maybe one other for my friends TC if that is ok with you. But I deffintiely dont have the time to be producing them thats for sure!!

EDIT: You call that thrown together??? Im an engineer and that still wouldnt be "my" thrown together thats for sure!! Thanks for the obvious effort.

 

Pete,

I know you have a disclaimer there, but I think you have to have a patent, trademark, copyright, or something other than a post on a message board..... I don't know anything about that kinda thing, but I don't think that you could hold up a case in court with a post on ScionLife if someone did produce these for profit....

 

Yeah... I know but... anythings better than nothing. I'm not really looking to make anything off of the idea, just a little credit where credit is due. If someone wants to make them and sell them then that's fine... I'd just like to know and possibly get one made up for a buddy etc.

 

right on.... I didn't know how serious you were with that....


with all the angles, seems like a difficult box to perfect....

 

Dan... You are welcome and... HAPPY BIRTHDAY DUDE!!!! That will be my gift to you. :D

Thrown together? Yeah maybe a little effort.. took about an hour to generate the drawing. Good to know there are other engineers here on the site. I'm one as well if you hadn't already figured that out. Been pounding out design for the last 20 or so years and it's still a lot of fun.

Hey... as far as the angles on the print go... you can round them to the nearest 1/4 degree and it will go together just fine. I have a few tips on glueing, sealing and covering if you need them.

Pete

 

I experimented around a bit with other ways of creating the angled corners and there really wasn't any simple way of doing it. I might change around the design a bit to make it more "angle" driven as opposed to linear as it currently is.

As I told Dan... just round to the nearest 1/4 degree and it will go together just fine.

 

Pete....you're insane.

That is all.

Did you make them get louder yet

 

Yes... I rewired them using one coil only for each (4ohm x 2 for 2ohm net on the amp). It's perfect!!! The amp is set to just a little over 50%. No clipping and really thumping bass. When the music's turned up I can see the rear window vibrate from the mirror. :D

Thanks for the help Chris.

 

hmm im very intrested in this set-up...and i got the plans. us FL scion guys gotta keep thumping together

 

wow thats an awsome box, im hopefully going to be a future owner of a tc and ive been wanting to but some ed subs prob 2 12's in my camry but, since im prob getting the tc 2 12's seem like it will take up too much room. Great job on the drawings. Im an studying to be an engineer as well, kinda looks like catia.

 

Solid Works... Good luck in school... If you decide to use my box design... PM if you need some help during your build.

 

just posting so i can get back to this thread...

 

I like the setup you got for that, very clean design and nice way to use the space.

 

Question for Mandos or anyone else, lets say I get a couple of Eu's and place them in the front as you once did-what did you have for the Hi's? The rear speakers, componets, or what? Right now I'm running the stock speakers, Memphis 10" in the stock Bazooka enclosure (making a similiar box with my own touch) but I want two Eu's up front for midbass but what about the rest of the music?

 

mandos pm'ed you...you guys making this box yet?

 

Don't put the 700's up front unless you're going to have an additional midrange and tweet up front as well like in a 3-way system... 700 in door + eDi6500s components in kickpanel enclosures would be pretty sweet.... although the 6500s do well without the 700's anyway...

 

^^ Yeah That.

As for us building this box...we don't currently have the 1/2" MDF...we're going to get some, but we can't get it locally = an hour drive for a sheet of wood

 

is there a certain point in time when we can expect it? that cubby's the only place i'd put it and id love to get these things pumpin soon