I purchased a set of HID lights from HIDRETRO. They look nice. Now I have a question about hooking them up. The HID wiring looks fairly simple. If anyone knows, please tell me if I am correct: The ballast plug connects to the factory low beam light plug. The other wires from the ballast with the thin white connect goes to the plug in the smaller black box (ignitor) coming from the HID headlight.

Now there are two other sets of wires. I assume one or both of these wire pairs are for the angle eyes. I assume these wire pairs can be run into the pair of wires for the small driving light that the new headlight unit no longer has (HID replaced it).

A picture of how my lights were constructed is contained at http://faqlight.carpassion.info/hl-hid-ballasts.htm Just look at the picture that describes the "Bosch Ballast Description" and you will see something similar to what I have. The Black and Yellow wires running from the ballast go into a molded plug that fits into the OEM low beam plug. There are no wires to run to a relay or the battery so I am confused. A picture of my actual lights can be found at http://www.hidretro.com/page50.htm Maybe someone can look at that picture and give me some direction.

Does anyone know if you have to incorporate a reply or run wires directly to the battery with this setup? I would appreciate help from anyone who knows about wiring HIDs in tCs. Or does anyone know how to PM EggNog as I know he has a similar set up.