So yesterday I attemted to remove the black tape off the a-pillars and I succeeded however, there is still pieces of it close to the windshield that I have no idea how to get off with out a razor blade... does anyone have an easier way of completing this task of mine? haha

I'll post up pics tonight when I get home... I think it looks pretty dope...

 

when i did mine i used a razor to cut the vinyl along the windshield. (the inside of the pillar between the windshield gasket and the a pillar) i hope this helps. best of luck to you

 

You can always use a rubber blade

Sent from my HTC EVO 3D X515m using Tapatalk 2

 

I have to find na blade tonight! I'll post up sum pic as well for you guys!

 

I used a toothpick and tweezers to get all of the little stubborn pieces under the weatherstripping, worked great.

 

When I removed mine, I had a bunch of swirls in the paint, I'm not sure if there's still some adhesive left or the adhesive remover itself damaged the paint. Any ideas?

 

I would of used a Heat Gun...Will make it very easy to remove.

 

There is tons of stuff in the wax section that will take out swirls and orange peal just take a look. my dad has a black vette so he has used just about all of them and it just seems to rely on how much work your willing to put into it.

 

use a clothing steamer, it heats up the vinyl and also kinda lubes it up break the vinyl down the middle this will allow you to pull it from the middle out and you remove all spots even under molding did this on mine it took a little effort but no cutting was required