I searched. Really, I did.

Anybody replace the rear engine/transmission mount on a 1st Gen xB with an automatic transmission? I was able to relatively easily replace the two engine mounts, but it appears that either the engine would need to be lifted way up or the front suspension carrier dropped. The bolts are just too long to remove the mount from where it fastens in.

Any tips?

John B.

 

your gonna have to drop the k-member to get to it saddly enough

 

Thanks, that's what I thought. Bummer.

John B.

 

You really dont have to drop the K member... but you have to unbolt it and lean the engine forward

 

i do not know how different it is from the manual xA, but i got mine out without removing the engine. it was hell and i must have erased that part of my memory.