Does any one have pictures of the mounting points?

 

sponsored sale going on right now with the tein set

https://www.scionlife.com/forums/viewtopic.php?t=35357

 

I was looking more into the mounting and IMO the Tein product is well made not a 100% sure if mounting at the hinge level is the best... when I did my own DIY hood struts I checked several struts and mounting locations and to me the hinge level is to low. Also the parts I used was $50. But I will say if you don't want to DIY and got the cash I would buy these and worst case mod these if need be...

 

id like to know the mounting points

 

Here is a link to an old thread. It does have a good pic of the mounting points

https://www.scionlife.com/forums/vie...ight=hood+prop

 

thanks

 

heres mine, made it about a year ago and only cost $40, cant beat that.

 

low down - Do you have a write up on what parts you used and how you installed them?

 

not at the moment but i can probably make one

 

Those look like they are in the same position as mine. I used Mighty Lift shocks from Auto Zone and made my own brackets for the top.

Now that there are so many kits available mine are no longer as unique as they were 2 1/2 years ago.

 

thats kinda what i did i found close up pics of the tein and used there same method, just made my own brackets and struts for a bronco 2 for the rear window glass from Advance auto, there not to strong to bent the hood when you shut it but stong enough to keep it from falling down too, the struts are called "stongarms" and the p/n is 4423 if that helps