Does anyone know if the puddle lights are flush when installed?

 

?
would like to know also

 

The ones from JLevi look a lot like dog nipples, IMO

 

So true!

If you have the time and know-how, I say DIY. Something like this would be much more flush:

http://www.oznium.com/1w-led

The best puddle lights I have seen were DIY. This guy in a local club pulled off the side skirts and drilled 10 holes into the bottom. Then installed single LEDs. Because of the thickness of the plastic, the LEDs were almost flush with the surface.

 

are you wanting to put them in the wheel wells?

i used thease.
http://www.oznium.com/led-flex-strips
i love oznium stuff
thease flex stips anr great because they are water proof.
i just used the blue 4.7" and rapped them around the strut/shock tube with a large black zip tire.
it was too easy, cheep and look great.

the pic in my profile is en old pic. i made some of my own with regular LEDs and i olny used 7 per wheel well.
the oznium flex stripps are wide angel flat heads and have 12 per wheel well, much nicer.

 

I want to put them in the bottom of the doors so when I upen them they light up the ground.