I just installed my mobile hid h11 3000k and i think the wiring harness isnt working on one side. the side that my battery is on (shorter wire) wont turn on the ballast. i though it might have been the ballast so i checked both of the ballast on the side that is working (the light further away from the battery long wire) and both check out in working order. i tried swapping the ballast and still no luck. any answers for this? this set is for my fog lights i also have another set for head lights. I was also disappointed in the quality of the h11 3000k bulbs as well. they didnt fit and i had to shave the tabs so they would fit. but im very happy with the H11 5000k kit and the 6000k bulbs i got from you. has this happen to anyone else?

 

did have problems with fuses blowing on Driver side AND CLIFF IS REPLACIN set of 4300 and payin shipping so he does have good service. If you take Pix and Email them to him, We wil try to analyze problem and take corrective action!

 

I have had my Mobile HID's on there for almost 6 months and not a single issue on mine. That is weird. I al running the 8K though also.

 

check the plugin to see if a tab dident get bent

 

yeah they all cheacked out. i did a voltage test and the drive side harness isnt gettin any power. could be it the relay?

 

sure might have a bad wire. can you check the wire with a tester see if theres a break in the wire .

the relay switch would work or not work at all if its bad

 

Hey RoboX,

I have the same MobileHID 3Ks for my fogs, and when I first installed them, they didn't work. I troubleshooted it down to a faulty harness by using my existing harness that were on my low beams. Since I totally removed my front bumper for the fog light install, I borrowed the harness that I was using for my headlights, and then had MobileHID send me a replacement harness. My money says it's a faulty harness...

Love the steez of your XB... definitely one of my few favorites.

 

yeah that what im thinking. but i emailed him last night and just waiting for a reply hopefully soon. hate take that bumper on and off

 

Exactly... That's why you should have just "borrowed" the relay harness you were using for your headlights, so you could properly install the fogs. Then when you get your replacement harness, it would be a 15 minute job to install the relay harness for your HID low beams. Good luck.

 

haha yeah but its to late ive already put everything back together and didnt think of that...hahah but Cliff is sending me a new harness so hopefully one last time and i should be golden. thanks for the reply ill let you guys know how it turns out

 

Hey RoboX is the kit working now......just wondering!!

 

Apparently you haven't been following RoboX's threads recently...

He no longer has his xB.

https://www.scionlife.com/forums/viewtopic.php?t=218920

 

oh.....that's a sad story

 

had trouble with ballast also. very happy with mobileHID customer service.