Dose anyone have an ECU wire layout?

Need to know where a couple of wires are for my AFC Neo.............

 

Which wires are you looking for and I can tell you...

 

2 ecu power leads
RPM signal
Throttle signal
2 ecu grounds
Airflow and pressure signal output
Illumination Power (the wire that illuminates the radio)

 

give me some time. I will run to the shop in a few and get my layout.

 

Thank You

 

ecu power lead - Black wire terminal A28
RPM Signal - White terminal B122
Throttle Signal - Light Green terminal B115
2 ECU Grounds - White/Black stripe terminals B44 & B46
Airflow input - Violet terminal B118

Terminal A is the smaller connector and Terminal B is the larger connector
Terminals are numbered left to right, top to bottom as if you were holding the connector and looking at the end that plugs into the ECU

 

Thank You so much.............

 

I got a dumb question, since the second gen xb has the same engine as the tc are the computers the same and if so the pin outs should be the same right.

 

No they aren't the same ECUs

 

thanks for the info

 

Fairladyz541 let us know how your install goes and what gains you get from the AFC. I am very interested in this mod.