Need some help with parts
Ok I recently tore my whole interior out of the xb2, and in doing so some things were a PITA and didn't come out properly.
The first one is the dome light directly above your head. The one that turns on when you open the door. The one clip broke and it doesn't clip in now

The second is the sunvisor clip. Not the sunvisor itself but what the sunvisor clips into. This piece:

Then the 3rd piece I need is the interior door panel. The spring inside of my door handle stripped out of place and now won't work. Not sure how this one happened. I took teh door panel off and when I put it back on wouldn't work. Most likely will need the whole assembly.
The first one is the dome light directly above your head. The one that turns on when you open the door. The one clip broke and it doesn't clip in now

The second is the sunvisor clip. Not the sunvisor itself but what the sunvisor clips into. This piece:

Then the 3rd piece I need is the interior door panel. The spring inside of my door handle stripped out of place and now won't work. Not sure how this one happened. I took teh door panel off and when I put it back on wouldn't work. Most likely will need the whole assembly.
First check to make sure glue can't solve any of the problems. From what I'd been told, I understood the dome light pulled straight out with just a little prying. Well, that turned out to be totally falacious and so I ended up having to reinforce and glue the back end of one of the retracting clips. Fortunately, it worked out fine. Good luck!
I'm almost willing to bet you could find the light and visor clip in any other similar Toyota. Go to the junkyard and look in the Toyotas. I'd put my money on some Corollas and Matrixs (Matrices?) of similar year. Say... 2005+
Other car companies have a bunch of parts that they tend to use throughout their model lines, I don't see why Toyota wouldn't do something similar.
Other car companies have a bunch of parts that they tend to use throughout their model lines, I don't see why Toyota wouldn't do something similar.
For the door handle the spring will go right back in to place. There is nothing to strip out, I've removed and completely disassembled mine 4-5 times for each door and they go back together everytime. If you take a look at one of the other handles you'll be able to see exactly how they go together.
Thread
Thread Starter
Forum
Replies
Last Post
TheTripleC
PPC: Vehicles
1
Jan 4, 2015 06:46 PM
JM Auto Racing
Exclusive Sponsored Sales
14
Dec 19, 2014 06:36 PM






