What wheels.?

 

DY Design D-12c 18x8 +40mm running a 225/40/18.

 

Thanks, xb looking nice and clean

 

THANKS!

 

I just got this now I know it's been a while but let me know when you guys are heading out there again if anything email me I'm down to pass by and check out some xb's around here my car is still a work in progress but sooner or later I'll have it together .. Qbanways@gmail.com and thanks

 

How did you get the back so low ?? I have racelands also but my rear didn't go that low and I have the perch all the way down

Nice box btw

 

Pretty sure its the Racelands, no matter what they never get as low as K-sport,D2,Tanabe , megan. plenty of people i have spoken and all have the same complaint.

 

He also has racelands I think it's that rear perch everyone takes them off .. I've been meaning to try that

 

spring question - if it were my xB I'd get coils. But, B&G or DF210's, which one is stiffer? I feel like S-Techs are going to be too soft. Thanks.

 

18...

 

I may have photoshopped that pic a little.

 

in other news this was the racelands with one of the rear perches removed. the lowest i've actually been. on 18" JNC ccw reps.

 

Does anybody know if these wheels and offset would work?

18x8.5 +33
18x9.5 +32

 

You'd probobaly be fine depending on how low you go. I'm at 18x8.5 et30 all around and am fine on 225/40/18s i could even space out the rear a bit. you may want to camber the rears a little with that fitment.

 

Might be safer to just run the 8.5 all around.

 

Should fit quite well. Since the rear track is 1/2" narrower on each side in relation to the fender you should end up with the same spacing from fender to wheel in both front and rear.

 

I was thinking of running 18x8.5 +35 in the front and 18x9.5 +40 in the rear. Im thinking I will need a 5mm spacer in the rear? any thoughts or suggestions?

 

either way it'll work.

 

what spacers are everyone running in the rear? i want to space out my rear wheels 5 or 8mm but don't want to buy something expensive. i was hoping there's some universal ones that might work.

 

what size wheels are you running? I'm running 18x8 +40mm and run a 10mm spacer in back. Looks ALMOST flush. Had to even roll the fenders to keep from rubbing. Havent posted a pic yet of the spacers since my phone cam is crap.