Notices
Scion xD Aero & Exterior Aero parts and exterior dress items...

Removing tail lights/rear markers for tinting and rear wiper

Old Mar 18, 2009 | 07:39 PM
  #1  
ScioNick's Avatar
Thread Starter
Banned
SL Member
 
Joined: Sep 2008
Posts: 56
Default Removing tail lights/rear markers for tinting and rear wiper

Need to know whats the easiest way to get the tail lights off the xD.Also for the little markers on the bumper. When I had the GTI it was just take a flathead and pop the little markers off, is it the same with the xD? Going to be using some VHT night shade on em.

For the tail lights in specific, is it as easy as removing the little panel that sits behind the tail light? Or do I have to remove the whole big plastic piece to get to the screws that hold the tail lights on.Also need to know how to remove the rear wiper, covers up some information for my business. Yea I've searched on here, didn't come up with anything. So if someone could point me in the right direction I'd appreciate it. Thanks,

Nick
Old Mar 19, 2009 | 03:47 AM
  #2  
mcbrew's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Nov 2008
Posts: 1,023
From: Annapolis, MD
Default

Why cover up your lettering and your license plate? Don't hundreds or thousands of people see it every day on the streets? lol!

Anyway, as far as the tail lights, there are, I believe, two nuts that need to be removed. Then there is a clip that hold it. Just pull hard and the clip will pop out. For more info, go to TRDSparks.com and look up the LED tail lights for the xD and click on the installation instructions. I did it back in December and it is really easy. Can't help you with the other items.
Old Mar 19, 2009 | 09:40 AM
  #3  
PUMPKIN1230's Avatar
Member
 
Joined: Sep 2008
Posts: 35
Default

.

The tail light is easy. Go into your hatch and pop open the panel covers directly covering the tail lights. Remove 2 nuts on each assembly. Be careful, the top one is a PITA if you got big hands. I lost one in the body and had to find it with a magnet. Then from the outside, pop the top out by tugging the top of the light that is held into a push grommet. Then pull up on the light because it's held by a grooved grommet on the bottom that holds the tab in place.

For the wiper, just pop the cover that is over the base. It's like a c clamp. It will flip to the right. Then remove the nut like how you remove the front wipers.

Hope this helps.

.
Old Mar 19, 2009 | 03:39 PM
  #4  
ScioNick's Avatar
Thread Starter
Banned
SL Member
 
Joined: Sep 2008
Posts: 56
Default

Cool, thanks for the help guys, but yea I found one screw which is in plain sight when you pop the cover off, guess I shoulda looked a little harder for the other one on the tail lights.I'll just have to be gentle with the reflectors and see if a flathead will do the trick. Can't wait, the fun begins this weekend :D
Old Mar 25, 2009 | 05:19 PM
  #5  
imageex's Avatar
Senior Member
SL Member
 
Joined: Dec 2008
Posts: 123
From: Las Vegas, NV
Default

Let me know how the reflectors goes. I painted my emblems flat black, and I was looking to do the same color to the reflectors, but i wanted to get a good coat on it, while they are off the car. I just don't like the look of them at night.

Does anyone know if painting the reflectors will cause any problems in Nevada?
Old Mar 25, 2009 | 06:23 PM
  #6  
ScioNick's Avatar
Thread Starter
Banned
SL Member
 
Joined: Sep 2008
Posts: 56
Default

https://www.scionlife.com/forums/viewtopic.php?t=254700 <--- link to the thread showing the tail lights and markers, as for whether you'll get any attention for tinting your reflectors in nevada, no idea.

If you do decide to remove the reflectors you'll have to get under the car and look under the bumper, there's a screw that holds part of the reflectors on that you'll have to take off before prying the reflector off (gently!) with a flat edge.

Nick
Old Mar 25, 2009 | 08:42 PM
  #7  
imageex's Avatar
Senior Member
SL Member
 
Joined: Dec 2008
Posts: 123
From: Las Vegas, NV
Default

Thanks, are you reflectors removed and painted, or totally stripped?

I think stripping them on a super white wouldn't look good, thats why im looking at blacking them out.
Old Mar 25, 2009 | 09:39 PM
  #8  
ScioNick's Avatar
Thread Starter
Banned
SL Member
 
Joined: Sep 2008
Posts: 56
Default

I removed em, sanded em and sprayed em with some VHT night shades, 3 coats turns them black enough for me. I havnt seen pics on what they look like blacked out on a white xD yet.
Old Mar 26, 2009 | 03:43 AM
  #9  
imageex's Avatar
Senior Member
SL Member
 
Joined: Dec 2008
Posts: 123
From: Las Vegas, NV
Default

You will one day, haha
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
YooItsJay
Scion tC 1G Owners Lounge
16
Dec 2, 2015 08:13 AM
toyotaisme
PPC: Vehicles
0
Jan 10, 2015 10:24 PM
kleecker
Scion xB 2nd-Gen Suspension & Handling
3
Jan 9, 2015 02:26 PM
Opr8r
Scion xB 1st-Gen Aero & Exterior
20
Feb 25, 2004 11:29 PM
George
Maintenance & Car Care
4
Nov 18, 2003 09:34 AM


Thread Tools
Search this Thread

All times are GMT. The time now is 08:21 AM.