I think I figured out how you did it. You ran the third LED in parallel with the second, right?

If so, you are ok current wise I think. I tried this with the blues, but I could notice a difference in brightness. However, white is composed of the whole spectrum, so the filter on the buttons will make that less noticeable than with a more pure color such as blue. As I mentioned, with the blue I could tell a difference due to there being twice as much current flowing through the top LED compared to the two in parallel. Good work though!

 

Hey guys... note that some of the factory printed connector are interrupted... i did this by leaving that same side of the LED unsoldered and putting some electrical tape under the LED to avoid contact with the board... here is a blurry picture of this... if u are smart you will figure it out....

IF YOU GUYS KNOW ABOUT SOMEBODY WITH A LCD SCREEN THAT I CAN BUY,LEASE, RENT OR WHATEVER FROM HIM... LET ME KNOW PLEASE....

 

iF ANYONE WANTS ME TO DO THIS MOD FOR THEM WE CAN WORK IT OUT... I NEED A NEW LCD SCREEN AND THERE IS ONE CENTER CONSOLE ON EBAY RUNNING ABOUT 130 DOLLARS... IF I HAVE SOMEONE THAT WANTS SPLIT COST WITH ME WE CAN DO SOMETHING AND I WILL SHIP TO THAT PERSON THE WHOLE CENTER CONSOLE ALREADY MODIFIED WITH THE COLOR OF YOUR CHOICE FOR A VERY REASONABLE PRICE... ALL THAT WILL NEED TO BE DONE IS TO SOLDER YOUR LCD SCREEN TO THE MODIFIED BOARD....

Will do that or something that can work... i not even know... i think that seeing my screen like that is driving me crazy... i'm desperate... some one with help or interested on some trade like the one above just let me know please.....