optional's pic thread! now w/moar Bride/Corbeau/Sparco/OEM gfx/Yakima!
03-10-2011, 08:06 PM
#141
WOW!
I totally forgot to get pics for you, I should do that today!
Umm, I still haven't bothered to get OEM belts, still rockin' the Corbeau's I picked up from Kanchi.
My rear seat is out atm because I installed Alpine Type-S 6.5" components all around and after removing the harness bar to get the rear door cards off I wasn't about to put them back in lol. So I'll probably take out the seat back and some other stuff there shortly.
I haven't found the extra cash to fill/paint the holes from the kill switch/terminals/tow-hooks yet mostly due to the ridiculous alternator/water-pump crap I had to go through recently, and because I need tires for my 18's which I'm getting this weekend so those are going back on and I'll lower my car back down yay!
Still about 40% into the turbo project as well, not sure if I'll ever actually finish it, I suspect I'd just be way happier with an MT swap instead but who knows if that'll ever happen or if I should even bother at this point.
Umm.. what else.. oh yeah my throttle body gave out so I got one from a yard and put that in, and umm, the alternator I had gave out, so I replaced it with a toyota OEM one this time, sucker was like $600 -.-
So, tomorrow or this afternoon the wheels go back on, the sway bar goes back to 'race' from 'street' and I'll lower the car and check over all my struts and lube 'em up or w/e they need, and then the new tires over the weekend and possibly a bike rack as I'm training for the Seattle-to-Portland ride this summer and do actually need a bike rack.. so yay!
Maybe some pics this weekend after it's all back to the way it should be, although I am shopping around for different wheels too, thinkin XD-9's or XT-7's in 18x9, I'll have 235/40/18 tires to put on them, so I'm not looking to do any sort of crazy stance, in fact that's a normal size tire for a 9" wide wheel so that'll be a bit less hardcore than some of these guys.
Also wanna grab the kaminari flush mount and maybe a CF garnish or a badgeless one. Also shopping for '08 headlights, have a deal that might work out on those in another week, I hope so anyway.
So yeah, hi.
I totally forgot to get pics for you, I should do that today!
Umm, I still haven't bothered to get OEM belts, still rockin' the Corbeau's I picked up from Kanchi.
My rear seat is out atm because I installed Alpine Type-S 6.5" components all around and after removing the harness bar to get the rear door cards off I wasn't about to put them back in lol. So I'll probably take out the seat back and some other stuff there shortly.
I haven't found the extra cash to fill/paint the holes from the kill switch/terminals/tow-hooks yet mostly due to the ridiculous alternator/water-pump crap I had to go through recently, and because I need tires for my 18's which I'm getting this weekend so those are going back on and I'll lower my car back down yay!
Still about 40% into the turbo project as well, not sure if I'll ever actually finish it, I suspect I'd just be way happier with an MT swap instead but who knows if that'll ever happen or if I should even bother at this point.
Umm.. what else.. oh yeah my throttle body gave out so I got one from a yard and put that in, and umm, the alternator I had gave out, so I replaced it with a toyota OEM one this time, sucker was like $600 -.-
So, tomorrow or this afternoon the wheels go back on, the sway bar goes back to 'race' from 'street' and I'll lower the car and check over all my struts and lube 'em up or w/e they need, and then the new tires over the weekend and possibly a bike rack as I'm training for the Seattle-to-Portland ride this summer and do actually need a bike rack.. so yay!
Maybe some pics this weekend after it's all back to the way it should be, although I am shopping around for different wheels too, thinkin XD-9's or XT-7's in 18x9, I'll have 235/40/18 tires to put on them, so I'm not looking to do any sort of crazy stance, in fact that's a normal size tire for a 9" wide wheel so that'll be a bit less hardcore than some of these guys.
Also wanna grab the kaminari flush mount and maybe a CF garnish or a badgeless one. Also shopping for '08 headlights, have a deal that might work out on those in another week, I hope so anyway.
So yeah, hi.
03-15-2011, 05:21 PM
#143
Picking up my '08 headlights on Friday 
black housings, black rings, clear corners!
Hoping to pick up some RS1 grills finally! PLEASE flintMicatC save them for me!
Also to order a carbon garnish, maybe someone local has one, hmm.
Also have a few tiny things I should finally pick up, battery tie-down/radiator stays and tinted side-markers and such, the little things bring it all together.
And to finally take those darn harness bar pictures lol.
Also DKFung88 did an LED swap on my gauges and HVAC for me, so I'll take some pictures of that, went white/blue on it all, looks really nice.
As for the backseat... it's all out lol, it's all just sitting in my garage, nobody can sit back there with the harness bar anyway, although the road noise is kind of getting to me, so I might end up putting at least the door panels back in.
black housings, black rings, clear corners!Hoping to pick up some RS1 grills finally! PLEASE flintMicatC save them for me!
Also to order a carbon garnish, maybe someone local has one, hmm.
Also have a few tiny things I should finally pick up, battery tie-down/radiator stays and tinted side-markers and such, the little things bring it all together.
And to finally take those darn harness bar pictures lol.
Also DKFung88 did an LED swap on my gauges and HVAC for me, so I'll take some pictures of that, went white/blue on it all, looks really nice.
As for the backseat... it's all out lol, it's all just sitting in my garage, nobody can sit back there with the harness bar anyway, although the road noise is kind of getting to me, so I might end up putting at least the door panels back in.
03-27-2011, 10:12 PM
#144
Bridgestone Potenza RE760's 235/40/18 getting aligned.
LED swap by DKFung88.
'08 headlights by Kanchi, black housings, ended up not doing clear corners, here's the work in progress shots by him.
Installing said headlights w/ 6000k HID kit from HIDXtra here on SL!
Oooh they look good :D
And some LED license plate bulbs from Cliff @ 2zero6factory, although no pic of that right now, my camera is in my car
LED swap by DKFung88.
'08 headlights by Kanchi, black housings, ended up not doing clear corners, here's the work in progress shots by him.
Installing said headlights w/ 6000k HID kit from HIDXtra here on SL!
Oooh they look good :D
And some LED license plate bulbs from Cliff @ 2zero6factory, although no pic of that right now, my camera is in my car
06-20-2011, 05:36 PM
#151
https://www.scionlife.com/forums/sho...47#post3861747
Part out.. back to stock, need some views for some leads on parts, local preferred, just need the exposure wherever I can get it.
Part out.. back to stock, need some views for some leads on parts, local preferred, just need the exposure wherever I can get it.
06-24-2011, 09:04 PM
#153
https://www.scionlife.com/forums/sho...06#post3864506
moved my FS thread to Misc/Lots instead of Wanted, prices are in the thread, got all the stock parts I need except headlights and battery, but those are trade items as I've mentioned, make offers, local prefered, I'm ferrying to PDX on Sunday so if you're down there lemme know.
moved my FS thread to Misc/Lots instead of Wanted, prices are in the thread, got all the stock parts I need except headlights and battery, but those are trade items as I've mentioned, make offers, local prefered, I'm ferrying to PDX on Sunday so if you're down there lemme know.
08-03-2012, 07:41 AM
#155
From white to FM.
RAWR!
and another version:
2008 Yamaha YZF-R6
Custom Flint Mica painted fairings.
Custom Safety Orange powder-coated wheels.
Shermoto shorty shift/brake levers.
Zero Gravity "Double Bubble" smoked windscreen.
Leo Vince SBK full exhaust.
Power Commander 3 USB tuned.
MotoSecurity i900 Alarm (tilt/ignition/etc).
Skur Carbon Fiber Triple-Tree cover.
Skur Carbon Fiber Gauge Cluster cover.
Vortex V3 Black keyless gas cap.
Vortex V3 frame sliders.
OEM solo seat cowl.
HTMoto Carbon Fiber style seat covers.
MotoBATT YTZ10S replacement.
Woodcraft rear spools.
35w 6000k HID kit for High & Low.
Flush mount front turn signals.
Custom rear plate and signal mount (fender eliminator)
Removed rear passenger pegs.
RAWR!
and another version:
2008 Yamaha YZF-R6
Custom Flint Mica painted fairings.
Custom Safety Orange powder-coated wheels.
Shermoto shorty shift/brake levers.
Zero Gravity "Double Bubble" smoked windscreen.
Leo Vince SBK full exhaust.
Power Commander 3 USB tuned.
MotoSecurity i900 Alarm (tilt/ignition/etc).
Skur Carbon Fiber Triple-Tree cover.
Skur Carbon Fiber Gauge Cluster cover.
Vortex V3 Black keyless gas cap.
Vortex V3 frame sliders.
OEM solo seat cowl.
HTMoto Carbon Fiber style seat covers.
MotoBATT YTZ10S replacement.
Woodcraft rear spools.
35w 6000k HID kit for High & Low.
Flush mount front turn signals.
Custom rear plate and signal mount (fender eliminator)
Removed rear passenger pegs.
Last edited by optional; 08-29-2012 at 06:15 PM.
08-04-2012, 06:40 AM
#157
Thread
Thread Starter
Forum
Replies
Last Post
kleecker
Scion xB 2nd-Gen Suspension & Handling
4
02-12-2015 11:02 PM
scionlife
Private Party Classifieds
0
04-16-2003 05:13 PM
