Hello, recently swapped out my engine for my 2008 TC. Car runs great, drives fine with no power issue. I had this P0016 cold come up. I changed the oil to make sure nothing was built up since the motor was just started. Changed it three times and ran it a while to make sure all the oil got around. I bought new camshaft, crankshaft and VVT sensors and replaced them all. I tested the ohms to the sensors to make sure they were within specs. I made sure the connections to the sensors were good and sending the correct voltage. I know this code involves timing, but everything seems to be running great without issue outside of this check engine light. Any help would be great, thank you everyone.