pm sent, there good buddy

 

I'm still waiting too (order 7289)....no worries. Any idea when the nine.4 will be back in stock?

 

Im suprised you guys havent bought a cnc water jet yet.

 

ok... im sorry im not really good with all this audio talk but i was just wondering if i got the SQ10 sub should i get a S2 or S4 voice coil and... which amp should i get? the NINe.2X or NINe.2??

 

The voice coil depends on how many speakers, and what amp you are/will be using.

 

ok.. say i want just one sub which amp should i get and which sub?? and i think im going to be using it with my stock ipod H/U until i get money for a double din DVD

 

if you get a 2 channel amp is has to be bridged.. usually into 4 ohms cause most amps can't handle 2 ohms bridged. If you get a mono sub amp, then you can get a 2 ohm sub.

 

so.. which amp and which sub from E.D should i get then?

 

From Elemental Designs, an SQ10 S4 and a Nine.2....

OR...

You could get an SQ10 S4, Nine.4 amp, and eD(i)6000s or 6500s components for the front.... Bridge the 2 rear channels to the SQ10 and run the front 2 channels on the components - would be killer!!!!!

 

ok so would i be safe if i did a SQ10 S4 and Nine.4 amp incase i want components later on?

 

Anyone have pictures of their setup yet? I was trying to visualize where the amp would go if I wanted it to be not easily visible (and keep my spare tire as well). Of course, with the cargo cover attached, it wouldn't matter that much.

 

You could put your amp in the spare tire like I did. I used an Alpine amp, but I think the ED amp will fit in the same spot.

 

have u guys seen this?...

http://www.youtube.com/watch?v=OoVIF...elated&search=

 

oh, right. I didn't notice the amp the first time I watched that video. And it definitely has the cover on.

 

That's correct.... you'll need a Single 4ohm VC to match with the nine.4. Components will definitely add to the overall SQ...

 

I am planning on ordering the sub today, but have no knowledge of this voice coil stuff, I read the page on it and still am confused. I have a MTX 251D amp. I am not expecting much, I just want some sort of extra bass, without having a box in the back. Tech support is closed until the 27th, so I figured I would ask here. I found these specs on my amp to make it easier. Hopefully this will make telling me what I need a little easier.

RMS Power 14.4 VDC
Input
Hi Level w/ Smart Engage
Low Level Input

Crossover
18dB/Octave, 85 Hz
2 Ohm Load 200 w x 1
4 Ohm Load 100 w x 1
Dynamic Power 14.4 VDC
2 Ohm Load 250 w x 1
4 Ohm Load 125 w x 1
Dimensions (with ISO Feet)
7.98" x 9.75" x 2.1"
20.3cm x 24.8cm x 5.3cm

 

With the 251D, You should get a Single 2ohm voice coil sub...

If you were going to get 2 SQ10's, you'd get the single 4 ohm in both subs and wire them in parallel for a 2ohm load....


Bottom line: for 1 sub on the MTX 251D - Get a single 2 ohm sub

 

Just to be clear would be the s2 option, correct?

 

^^ yes

 

Ummm, so I found out at a car stereo place today that JL Audio is putting out a Stealthbox for the tC. It's not even on their website yet but they've sent out "coming soon" printed materials