New question: Is the T1815 Pioneer Premier Head unit compatible in a 2007 scion tc with the stock wiring? i read 1 thread that said it had issues because the wire diagram is different(ground is on a different pin)... can anyone confirm or have any input. Or is there any plug n play unit for a 2007 scion that has high voltage subwoofer output rca's?

 

it should work since its an optional head unit.

 

Okay, trying to find DRL information for iQ, but searches here aren't helping - any ideas? Have a kit but need light wiring information for 2012 iQ.
Txs

 

See what I mean? Searched for iQ information and post wound up in Tc.

Scionlife doesn't even include iQ's in Vehicle menu. Sheesh!

 

There are 4 wires on the primary O2 sensor for the scion tC: 1 white, 1 blue, and 2 black. Would it be safe to assume that the 2 black are both ground and can be interchanged? I'm in the middle of replacing a bad sensor (extended) and have lost track of which is which.

Also, without the primary O2 sensor, would fuel trims be non-existent (0) because the car cannot get an AFR reading?

Edit, for others who are interested: From what I understand, the two black wires are for heating the O2 sensor so that it can get a proper reading, these two wires should be interchangeable.

 

Anyone know how to set up the winjet fog lights so they shut off with the car? Currently I have the positive (red) wire directly on my battery which is causing to not shut off when I forget which results in a dead battery. Is there anywhere else this wire can go that shuts off the lights with the car?

 

Is there a labeled diagram of an 06 scion tc engine? There are a bunch of hoses, wires, and other small parts i want to replace but i dont know what they're called.

 

how do i plug my LED strips to my parking lights or DRl's as some call it?

** I used wire tappers and my head and google**

 

ok, i installed progress rear sway bar last sunday on my tc. i made sure the new endlinks lined up even n same length with stockies. ive been hearing this *clunking* noise when i drive at slow speed (<30mph) on bad roads. so today i went under n checked the endlinks...the half-part (female heim) of the endlink that's connected to factory mount is moving?? is it where the noise come from??

 

Hi, I recently bought a XB 2005, and I need the name of the small red light which is in the side back bumper (the right one, on the passenger´s side).
I would appreciate your help, ´cause I need this part, and I don´t know how to look for it in the internet to buy it.
Thank you!

 

Side marker maybe?

 

NEW QUESTION:

I just installed megan racing s pipe to a no name brand mid pipe. i need to replace the gasket between the two pipes. there is currently a soft metal two bolt style gasket but the oem only brings up regular crush gasket w/ out the two bolt pattern. can i use the oem not bolt pattern washer?

 

Hi! When I search it by Side marker, it´s the front/side light.
Thank you for your answer

 

hello, i just wanted to see if anyone here in socal has bought pads and rotors from this compnay if so how good are they. also give your opinion if you would or wouldnt buy thanks.

https://rotorwork.com/index.php

$85 for a set of front rotors and pads crossdrilled and slotted. iffy? i know.

 

Hi, so i installed a new radio on my first gen tc. I got the plug with the already spliced wires and i followed the instruction matching the new radios wires to the plug wires. The only questionable wire was an orange one wich i beleive is an auto dim feature. Anyways i turendthe ca on everything worked fine but i smelled and saw a bit of smoke coming from the spedometer area in turn tge lights on the hvac **** are of but everything else works just fine. Should i worry? Or leave it as is?.

 

the bushings need to be lubed...your sway bar should have come with a little tube of either synthetic or silicone based grease its kind of clear colored...do not buy petroleum or lithium based grease its bad for your bushings, from what i understand they will crack over time...all you have to do is take those C clamp looking things on the inner portion of your sway bar off, you shouldnt have to remove the whole bar, then take off the rubber bushing that wraps around the bar...rub synthetic or silicone grease on the inside of the rubber bushing (just put a moderate amout in there evenly) and reassemble... that should take care of the noise...you will have to repeat this process 1 or 2 times a year maybe more depends how much you drive.

 

My engine light is on & diagnostics reveal the EVAP leak detection pump is faulty. How difficult is it to replace pump on my own?

 

Wire them to the Ignition wire. That's how mine was done. When I turn off the car they go off even when the button is pressed in.

 

Did you try checking the gas cap?

why i am asking----> https://www.scionlife.com/forums/sho...d.php?t=179167

 

this might just be me but i would go back and check it all again (if not done so already) rewire if needed. check each wire to be sure. Smells and or smoke = NO GOOD